Kenmore · Dishwasher
Clean light blinks 7 times Heater circuit failure
What this code means
The control panel didn't detect the heating element energizing to heat wash water.
Most likely causes
- Failed heating element
- Heater relay or wiring fault on the control board
What to try first
Not user-serviceable; needs the heating element and its circuit tested.
Safety note: if this code returns after one clean reset, stop resetting it — repeated lockouts usually mean a real fault that needs a licensed technician. Never bypass a safety switch.
Find the part on Amazon →FAQ
What does Kenmore error code Clean light blinks 7 times mean?
Heater circuit failure. The control panel didn't detect the heating element energizing to heat wash water.
Can I fix Kenmore code Clean light blinks 7 times myself?
Usually not. Not user-serviceable; needs the heating element and its circuit tested. If the code returns after one reset, it needs a licensed technician.
What causes Kenmore code Clean light blinks 7 times?
The most common causes are: failed heating element; heater relay or wiring fault on the control board.
Other Kenmore dishwasher codes
All Kenmore dishwasher error codes →
Other dishwasher brands: Bosch · Whirlpool · KitchenAid · Samsung · GE · LG · Maytag · Frigidaire · Generic · Electrolux
This information may contain errors or not apply to your exact model — always double-check it against your appliance's own manual before acting. If there's any chance of a gas, fire, electrical, carbon monoxide, or other safety hazard, stop and call a licensed professional or the appropriate agency (e.g. your gas utility) instead of relying on this page alone.