LG · Dishwasher
IE Inlet / water fill error
What this code means
The dishwasher isn't detecting enough water entering the tub within the expected time.
Most likely causes
- Water supply valve under the sink partially closed
- Clogged inlet water filter screen
- Kinked fill hose
What to try first
Confirm the shutoff valve under the sink is fully open, then check the small mesh screen where the fill hose connects.
Good news: this one is often fixable without a service call. If it persists after the steps above, have it looked at.
Find the part on Amazon →FAQ
What does LG error code IE mean?
Inlet / water fill error. The dishwasher isn't detecting enough water entering the tub within the expected time.
Can I fix LG code IE myself?
Often, yes. Confirm the shutoff valve under the sink is fully open, then check the small mesh screen where the fill hose connects.
What causes LG code IE?
The most common causes are: water supply valve under the sink partially closed; clogged inlet water filter screen; kinked fill hose.
Other LG dishwasher codes
All LG dishwasher error codes →
Other dishwasher brands: Bosch · Whirlpool · KitchenAid · Samsung · GE · Maytag · Frigidaire · Generic · Electrolux · Kenmore
This information may contain errors or not apply to your exact model — always double-check it against your appliance's own manual before acting. If there's any chance of a gas, fire, electrical, carbon monoxide, or other safety hazard, stop and call a licensed professional or the appropriate agency (e.g. your gas utility) instead of relying on this page alone.