Maytag · Dishwasher
2-2 (Clean light flashing) User interface can't communicate with control board
What this code means
The touch panel and the main electronic control board have lost communication.
Most likely causes
- Loose ribbon cable between panel and board
- Failed user interface board
What to try first
Not user-serviceable; needs the connection or board inspected by a technician.
Safety note: if this code returns after one clean reset, stop resetting it — repeated lockouts usually mean a real fault that needs a licensed technician. Never bypass a safety switch.
FAQ
What does Maytag error code 2-2 (Clean light flashing) mean?
User interface can't communicate with control board. The touch panel and the main electronic control board have lost communication.
Can I fix Maytag code 2-2 (Clean light flashing) myself?
Usually not. Not user-serviceable; needs the connection or board inspected by a technician. If the code returns after one reset, it needs a licensed technician.
What causes Maytag code 2-2 (Clean light flashing)?
The most common causes are: loose ribbon cable between panel and board; failed user interface board.
Other Maytag dishwasher codes
All Maytag dishwasher error codes →
Other dishwasher brands: Bosch · Whirlpool · KitchenAid · Samsung · GE · LG · Frigidaire · Generic · Electrolux · Kenmore
This information may contain errors or not apply to your exact model — always double-check it against your appliance's own manual before acting. If there's any chance of a gas, fire, electrical, carbon monoxide, or other safety hazard, stop and call a licensed professional or the appropriate agency (e.g. your gas utility) instead of relying on this page alone.