Whirlpool · Dishwasher
F2E1 Long drain / drain time exceeded
What this code means
The control senses the drain cycle is taking far longer than normal, usually because water isn't clearing the sump.
Most likely causes
- Clogged drain filter or sump area
- Kinked or clogged drain hose
- Air gap or disposal connection blocked
What to try first
Clean the fine and coarse filters at the bottom of the tub, then run an empty cycle to confirm it drains.
Good news: this one is often fixable without a service call. If it persists after the steps above, have it looked at.
Find the part on Amazon →FAQ
What does Whirlpool error code F2E1 mean?
Long drain / drain time exceeded. The control senses the drain cycle is taking far longer than normal, usually because water isn't clearing the sump.
Can I fix Whirlpool code F2E1 myself?
Often, yes. Clean the fine and coarse filters at the bottom of the tub, then run an empty cycle to confirm it drains.
What causes Whirlpool code F2E1?
The most common causes are: clogged drain filter or sump area; kinked or clogged drain hose; air gap or disposal connection blocked.
Other Whirlpool dishwasher codes
All Whirlpool dishwasher error codes →
Other dishwasher brands: Bosch · KitchenAid · Samsung · GE · LG · Maytag · Frigidaire · Generic · Electrolux · Kenmore
This information may contain errors or not apply to your exact model — always double-check it against your appliance's own manual before acting. If there's any chance of a gas, fire, electrical, carbon monoxide, or other safety hazard, stop and call a licensed professional or the appropriate agency (e.g. your gas utility) instead of relying on this page alone.