Amana · Furnace / HVAC
2 flashes Draft inducer not operating / pressure switch closed
What this code means
The inducer motor isn't running as expected, or the pressure switch circuit is showing closed when it should be open.
Most likely causes
- Failing inducer motor
- Stuck or miswired pressure switch
What to try first
Listen for the inducer motor starting when the thermostat calls for heat; if it's silent, this needs a technician.
Safety note: if this code returns after one clean reset, stop resetting it — repeated lockouts usually mean a real fault that needs a licensed technician. Never bypass a safety switch.
FAQ
What does Amana error code 2 flashes mean?
Draft inducer not operating / pressure switch closed. The inducer motor isn't running as expected, or the pressure switch circuit is showing closed when it should be open.
Can I fix Amana code 2 flashes myself?
Usually not. Listen for the inducer motor starting when the thermostat calls for heat; if it's silent, this needs a technician. If the code returns after one reset, it needs a licensed technician.
What causes Amana code 2 flashes?
The most common causes are: failing inducer motor; stuck or miswired pressure switch.
Other Amana furnace codes
All Amana furnace error codes →
Other furnace brands: Trane · Carrier · Lennox · Goodman · American Standard · Rheem · Bryant · Generic · Nest
This information may contain errors or not apply to your exact model — always double-check it against your appliance's own manual before acting. If there's any chance of a gas, fire, electrical, carbon monoxide, or other safety hazard, stop and call a licensed professional or the appropriate agency (e.g. your gas utility) instead of relying on this page alone.