Mitsubishi · Mini-split
E6 Indoor/outdoor communication error
What this code means
The indoor head and outdoor condenser have lost the signal link between them.
Most likely causes
- Loose or damaged communication wire between units
- Water intrusion at an outdoor wire connection
- Failing control board on either unit
What to try first
Power-cycle the whole system at the breaker for two minutes, then restart.
Safety note: if this code returns after one clean reset, stop resetting it — repeated lockouts usually mean a real fault that needs a licensed technician. Never bypass a safety switch.
FAQ
What does Mitsubishi error code E6 mean?
Indoor/outdoor communication error. The indoor head and outdoor condenser have lost the signal link between them.
Can I fix Mitsubishi code E6 myself?
Usually not. Power-cycle the whole system at the breaker for two minutes, then restart. If the code returns after one reset, it needs a licensed technician.
What causes Mitsubishi code E6?
The most common causes are: loose or damaged communication wire between units; water intrusion at an outdoor wire connection; failing control board on either unit.
Other Mitsubishi mini-split codes
All Mitsubishi mini-split error codes →
Other mini-split brands: Daikin · LG · Fujitsu · Gree · Carrier · Generic · Panasonic
This information may contain errors or not apply to your exact model — always double-check it against your appliance's own manual before acting. If there's any chance of a gas, fire, electrical, carbon monoxide, or other safety hazard, stop and call a licensed professional or the appropriate agency (e.g. your gas utility) instead of relying on this page alone.