Electrolux · Washer / dryer
E10 Water fill error (washer)
What this code means
Shares platform logic with Frigidaire — insufficient water detected entering the tub.
Also displayed as: E11 on some Electrolux control panel generations — same fault, different display.
Most likely causes
- Partially closed supply valve
- Clogged inlet filter screen
What to try first
Check both supply valves are fully open and clean the small mesh screens at the hose connections.
Good news: this one is often fixable without a service call. If it persists after the steps above, have it looked at.
FAQ
What does Electrolux error code E10 mean?
Water fill error (washer). Shares platform logic with Frigidaire — insufficient water detected entering the tub.
Can I fix Electrolux code E10 myself?
Often, yes. Check both supply valves are fully open and clean the small mesh screens at the hose connections.
What causes Electrolux code E10?
The most common causes are: partially closed supply valve; clogged inlet filter screen.
Other washer or dryer brands: Samsung · LG · Whirlpool · Maytag · GE · Generic · Frigidaire · Kenmore · Speed Queen
This information may contain errors or not apply to your exact model — always double-check it against your appliance's own manual before acting. If there's any chance of a gas, fire, electrical, carbon monoxide, or other safety hazard, stop and call a licensed professional or the appropriate agency (e.g. your gas utility) instead of relying on this page alone.