LG · Washer / dryer
IE Inlet water error (washer)
What this code means
Same fill-detection fault family as Samsung's 4E — water isn't reaching the tub fast enough.
Most likely causes
- Supply valve partially closed
- Kinked or frozen fill hose
- Debris in the inlet valve screen
What to try first
Fully open both supply valves and check the inlet screens for sediment buildup.
Good news: this one is often fixable without a service call. If it persists after the steps above, have it looked at.
FAQ
What does LG error code IE mean?
Inlet water error (washer). Same fill-detection fault family as Samsung's 4E — water isn't reaching the tub fast enough.
Can I fix LG code IE myself?
Often, yes. Fully open both supply valves and check the inlet screens for sediment buildup.
What causes LG code IE?
The most common causes are: supply valve partially closed; kinked or frozen fill hose; debris in the inlet valve screen.
Other LG washer or dryer codes
All LG washer or dryer error codes →
Other washer or dryer brands: Samsung · Whirlpool · Maytag · GE · Generic · Frigidaire · Electrolux · Kenmore · Speed Queen
This information may contain errors or not apply to your exact model — always double-check it against your appliance's own manual before acting. If there's any chance of a gas, fire, electrical, carbon monoxide, or other safety hazard, stop and call a licensed professional or the appropriate agency (e.g. your gas utility) instead of relying on this page alone.