Samsung · Washer / dryer
LE Motor / leakage error (washer)
What this code means
Samsung front-loaders show this for either a detected leak or a motor speed sensor fault, depending on model.
Most likely causes
- Overloading causing the drum motor to strain
- Water leaking near the door boot seal
- Failing motor or rotor sensor
What to try first
Reduce load size and inspect the rubber door boot for tears or trapped debris holding it open slightly.
Safety note: if this code returns after one clean reset, stop resetting it — repeated lockouts usually mean a real fault that needs a licensed technician. Never bypass a safety switch.
Find the part on Amazon →FAQ
What does Samsung error code LE mean?
Motor / leakage error (washer). Samsung front-loaders show this for either a detected leak or a motor speed sensor fault, depending on model.
Can I fix Samsung code LE myself?
Usually not. Reduce load size and inspect the rubber door boot for tears or trapped debris holding it open slightly. If the code returns after one reset, it needs a licensed technician.
What causes Samsung code LE?
The most common causes are: overloading causing the drum motor to strain; water leaking near the door boot seal; failing motor or rotor sensor.
Other Samsung washer or dryer codes
All Samsung washer or dryer error codes →
Other washer or dryer brands: LG · Whirlpool · Maytag · GE · Generic · Frigidaire · Electrolux · Kenmore · Speed Queen
This information may contain errors or not apply to your exact model — always double-check it against your appliance's own manual before acting. If there's any chance of a gas, fire, electrical, carbon monoxide, or other safety hazard, stop and call a licensed professional or the appropriate agency (e.g. your gas utility) instead of relying on this page alone.