Frigidaire · Washer / dryer
E10 Water doesn't enter (washer)
What this code means
No water is being detected entering the tub at all.
Most likely causes
- Supply valve fully closed
- Water inlet valve failed
- Disconnected fill hose
What to try first
Check both supply valves behind the washer are open and hoses are firmly connected.
Good news: this one is often fixable without a service call. If it persists after the steps above, have it looked at.
FAQ
What does Frigidaire error code E10 mean?
Water doesn't enter (washer). No water is being detected entering the tub at all.
Can I fix Frigidaire code E10 myself?
Often, yes. Check both supply valves behind the washer are open and hoses are firmly connected.
What causes Frigidaire code E10?
The most common causes are: supply valve fully closed; water inlet valve failed; disconnected fill hose.
Other Frigidaire washer or dryer codes
All Frigidaire washer or dryer error codes →
Other washer or dryer brands: Samsung · LG · Whirlpool · Maytag · GE · Generic · Electrolux · Kenmore · Speed Queen
This information may contain errors or not apply to your exact model — always double-check it against your appliance's own manual before acting. If there's any chance of a gas, fire, electrical, carbon monoxide, or other safety hazard, stop and call a licensed professional or the appropriate agency (e.g. your gas utility) instead of relying on this page alone.