Frigidaire · Washer / dryer
E11 Fill time too long (washer)
What this code means
The washer is taking too long to reach its expected water level.
Most likely causes
- Low household water pressure
- Clogged inlet screens
- Faulty or partially blocked water inlet valve
What to try first
Check both supply hoses for kinks and clean the small mesh screens at the inlet connections.
Good news: this one is often fixable without a service call. If it persists after the steps above, have it looked at.
FAQ
What does Frigidaire error code E11 mean?
Fill time too long (washer). The washer is taking too long to reach its expected water level.
Can I fix Frigidaire code E11 myself?
Often, yes. Check both supply hoses for kinks and clean the small mesh screens at the inlet connections.
What causes Frigidaire code E11?
The most common causes are: low household water pressure; clogged inlet screens; faulty or partially blocked water inlet valve.
Other Frigidaire washer or dryer codes
All Frigidaire washer or dryer error codes →
Other washer or dryer brands: Samsung · LG · Whirlpool · Maytag · GE · Generic · Electrolux · Kenmore · Speed Queen
This information may contain errors or not apply to your exact model — always double-check it against your appliance's own manual before acting. If there's any chance of a gas, fire, electrical, carbon monoxide, or other safety hazard, stop and call a licensed professional or the appropriate agency (e.g. your gas utility) instead of relying on this page alone.